Hickory Engineered Hardwood Flooring – From The Forest, LLC

Northern Hickory Engineered Hardwood Flooring

MULTIPLY CORE COLLECTION


Beam


Smoke

360° CORE COLLECTION


Napa: Grey Musk


Sonoma: Grey Musk


Toasty


Prairie Natural Hickory

Multiply Core Construction


Why Plywood Core?

  • When multiple pieces of plywood are layered on top of each other (with grains going different directions) it creates an engineered balance. This balance prevents expansion, contraction, bowing, twisting and warping. This is the reason why engineered flooring can be installed below grade level's (in basements).
  • The more ply's that are added, the more stable the plank is going to be.
  • The decorative layer on this construction provides the ability to refinish the floor. The flooring can be professionally re-screened an unlimited amount of times allowing it to last generations.

The Industries Best Finish (2X MORE WATER & WEAR RESISTANT)

Installation Profile Details


Tongue and Groove Profile

Our tongue and groove profile is truly innovative so you can be confident that once your flooring is installed, it is going to last for generations. Our highly experienced team of flooring manufacturing engineers have developed a T&G construction that makes installation easy to accomplish whether you want to glue, float, nail or staple the floor in place.


Installation Made Easy

  • The nail pocket allows space for a staple or nail to be used without interfering with the way each plank interlocks with each other.
  • Our innovative adhesive pockets allow more glue to be applied between the tongue and groove which creates a stronger bond to the planks and to the sub floor.

Environmental Focus

Preserving our natural resources and environment are important at From The Forest. The raw materials used for the flooring products are sourced only from managed forests in the United States and our wear resistant, ceramic top coats, and stains are water-based (zero VOC) and UV cured to protect air quality and our adhesives meet the highest standards for air emissions. Our lumber is purchased from suppliers within 500 miles of our factory that have active reforestation programs and share our environmental responsibility. Only a portion of mature trees are cut, leaving other mature trees for seeding purposes, and smaller trees for future logging. We are committed to sustainable forest management and we encourage the use of wood as an environmentally acceptable and renewable material. We have not and will not purchase lumber from any supplier involved in improper practices.

  • 100% of our raw materials are sourced only from sawmills with strict chain of custody standards in place for all raw materials
  • All raw materials are sourced within 500 miles of our factory
  • Formaldehyde free adhesives used in the construction of the flooring - 100% CARB Compliance with Zero VOC’s
  • All topcoats are WearMax DWR and protect air quality
  • All products are GREENGUARD certified

Why Wood & Why Engineered?


Nothing beats the beauty of real woodReal wood products portray a sense of elegance and class that does not go unnoticed. Imitation products will never be able to compare.

Every plank is unique -  Wood is a product of nature, and because of this, it allows for a new unique characteristic on every plank. The unique nature of wood is what makes it so sophisticated.

Environment – Wood products are renewable and substantially better for the environment over all other materials that are used to imitate the look of wood.

Safety Scientific Research has shown that Luxury Vinyl Tile (LVT) products have cytotoxicity/allergenicity components and are combustible. Cytotoxicity/ allergenicity components can create health issues and cause damage to living tissue in humans and pets through exposure. Combustible building products may release smoke, toxic gasses and other chemical compounds when exposed to elevated temperatures. This may have a hazardous impact on building occupants, neighborhoods, first responders and the environment. Wood products are natural and do not have any of these risk factors associated.

Durability – Constructed to have enhanced stability and more resistance to daily wear, tear and buckling and offers an extremely durable coating capable of withstanding treatment.

Resistance - Dimensionally very stable preventing the wood from expanding and contracting during fluctuations of humidity and temperature.

Radiant Heat Compatibility -  Majority of engineered hardwood offerings can be installed over radiant heat.

Installation Capability -  Can be installed on all grade levels in a variety of different ways including nailing, gluing, floating and stapling. Many handy homeowners could even do it themselves!

About From The Forest

Made in the USA - Weston, Wisconsin is in the middle of the North American hardwood supply, reducing the environmental footprint as well as inventory and transportation costs. All raw materials are sourced within 500 miles of our factory.

Environmentally Focused Strict chain of custody standards are followed. CARB compliant with zero VOC’s.

Best Top Coat in the Industry – WearMax DWR is used on all of our products and is the most water repellent as well as scratch, scuff and wear resistant finish in the industry.

Service - Midwest values with an experienced team of customer service and product engineers that will design and make wood flooring that looks great and performs exceptionally.

Value Priced Products - Due to efficient raw material sourcing from North American forests and innovative manufacturing processes.

Flexible Manufacturing and Creative Product Solutions - Allows customers many product features to choose from so they can customize and offer unique solutions.

More about From The Forest

Located in Central Wisconsin, From The Forest is proud to be an innovative, American Engineered Hardwood manufacturing company that sources all its material from North America sense 2007. Overcoming much adversity, From The Forest has thrived, solidifying the company's decision to keep the business in North America. Founded by industry veteran Tryggvi Magnusson, leads his team to understand the responsibility of producing high performing, beautiful flooring products at a competitive price. With over 100 Years of combined wood flooring manufacturing experience, our customers benefit from this by knowing the products are designed for stability and long-term wear.

Care & Cleaning

The ONLY approved method for cleaning your From The Forest hardwood is to use our From The Forest Hardwood cleaner or just a damp mop and water. It is important to make sure the moisture content is a limited amount so that it will evaporate almost immediately. Standing water and hardwood floors do not mix!

If a scratch should occur, we recommend using WearMax Scratch Concealer. WearMax Scratch Concealer can be used on any flooring with a ceramic based finish, along with wood touch up markers.


Hardwood Flooring Cleaner

Sold out

Wood Repair Marker Kit

Sold out

Hardwood Scratch Conealer

Sold out

View detailed written instructions (do's & dont's) by clicking the button below

Installation


 

TONGUE AND GROOVE DO IT YOURSELF INSTALLATION

  • Installs on all grade levels (basement approved)
  • Installation Methods: glue, float, nail or staple
  • Hickory is NOT approved for installation over hydronic radiant heat

 



Installation Made Easy

  • The nail pocket allows space for a staple or nail to be used without interfering with the way each plank interlocks with each other.
  • Our innovative adhesive pockets allow more glue to be applied between the tongue and groove which creates a stronger bond to the planks and to the sub floor.
  • Do it yourself! Follow written installation instructions and contact us if you have any questions.

 

360° Core (EXTREME DENT RESISTANCE)

EXTREME DURABILITY AND DENT RESISTANCE

From the Forest developed an engineered top layer veneer that is protected by eight layers of durable top coat. WearMax™ finish combined with an impact resistant 360° high-density fiberboard that is composed of the most dense & durable woods, provides a superior performance core for maximum durability and strength. This combination makes the flooring two times more resistant to wear from long term use.

WARRANTY PROTECTED

From the Forest’s superior engineered hardwood collections are backed with a Limited Lifetime Residential Warranty and a 10 Year Light Commercial Warranty for peace of mind.

360° ENGINEERED HARDWOOD CONSTRUCTION

The veneer is so thin because that is how much we trust the core!

WHAT IS 360 ° CORE?

Core 360° High Density Fiberboard (HDF) is the "middle layer" located between the top and bottom veneers. This "key ingredient" is a big contributor to the success and performance of From The Forest products. It is the densest core you can find and out performs plywood.

ECO-CERTIFIED

Core 360° High Density Fiberboard (HDF) is made with 100% pre-consumer recycled forest content, composed of wood fiber extracted from chips and pulped wood waste of the densest & durable woods for superior performance. The multi-directional wood fibers and consistent density throughout the core ensure flooring boards will lay flat.

SUPERIOR PERFORMANCE

Core 360° High Density Fiberboard (HDF) has a density consistent at 57 pounds per cubic foot with a swelling coefficient of 6%. In comparison, plywood core has a density consistent at 42 pounds per cubic foot with a swelling coefficient of 18% - 20%. Designed to absorb impact, engineered wood floors with Core 360° are two times more resistant to dent, wear, and moisture than any other hardwood floor.

CARB COMPLIANT

Core 360° High Density Fiberboard (HDF) Core is 93120 Phase 2 CARB Compliant. No Added Formaldehyde.

WATCH THE HAMMER TEST VIDEO

The Industries Best Finish (2X MORE WATER & WEAR RESISTANT)

Installation Profile Details


Tongue and Groove Profile

Our tongue and groove profile is truly innovative so you can be confident that once your flooring is installed, it is going to last for generations. Our highly experienced team of flooring manufacturing engineers have developed a T&G construction that makes installation easy to accomplish whether you want to glue, float, nail or staple the floor in place.


Installation Made Easy

  • The nail pocket allows space for a staple or nail to be used without interfering with the way each plank interlocks with each other.
  • Our innovative adhesive pockets allow more glue to be applied between the tongue and groove which creates a stronger bond to the planks and to the sub floor.


DIY Easy Installation

VALINGE CLICK AND LOCK PROFILE

Environmental Focus

Preserving our natural resources and environment are important at From The Forest. The raw materials used for the flooring products are sourced only from managed forests in the United States and our wear resistant, ceramic top coats, and stains are water-based (zero VOC) and UV cured to protect air quality and our adhesives meet the highest standards for air emissions. Our lumber is purchased from suppliers within 500 miles of our factory that have active reforestation programs and share our environmental responsibility. Only a portion of mature trees are cut, leaving other mature trees for seeding purposes, and smaller trees for future logging. We are committed to sustainable forest management and we encourage the use of wood as an environmentally acceptable and renewable material. We have not and will not purchase lumber from any supplier involved in improper practices.

  • 100% of our raw materials are sourced only from sawmills with strict chain of custody standards in place for all raw materials
  • All raw materials are sourced within 500 miles of our factory
  • Formaldehyde free adhesives used in the construction of the flooring - 100% CARB Compliance with Zero VOC’s
  • All topcoats are WearMax DWR and protect air quality
  • All products are GREENGUARD certified

Why Wood & Why Engineered?


Nothing beats the beauty of real woodReal wood products portray a sense of elegance and class that does not go unnoticed. Imitation products will never be able to compare.

Every plank is unique -  Wood is a product of nature, and because of this, it allows for a new unique characteristic on every plank. The unique nature of wood is what makes it so sophisticated.

Environment – Wood products are renewable and substantially better for the environment over all other materials that are used to imitate the look of wood.

Safety Scientific Research has shown that Luxury Vinyl Tile (LVT) products have cytotoxicity/allergenicity components and are combustible. Cytotoxicity/ allergenicity components can create health issues and cause damage to living tissue in humans and pets through exposure. Combustible building products may release smoke, toxic gasses and other chemical compounds when exposed to elevated temperatures. This may have a hazardous impact on building occupants, neighborhoods, first responders and the environment. Wood products are natural and do not have any of these risk factors associated.

Durability – Constructed to have enhanced stability and more resistance to daily wear, tear and buckling and offers an extremely durable coating capable of withstanding treatment.

Resistance - Dimensionally very stable preventing the wood from expanding and contracting during fluctuations of humidity and temperature.

Radiant Heat Compatibility -  Majority of engineered hardwood offerings can be installed over radiant heat.

Installation Capability -  Can be installed on all grade levels in a variety of different ways including nailing, gluing, floating and stapling. Many handy homeowners could even do it themselves!

About From The Forest

Made in the USA - Weston, Wisconsin is in the middle of the North American hardwood supply, reducing the environmental footprint as well as inventory and transportation costs. All raw materials are sourced within 500 miles of our factory.

Environmentally Focused Strict chain of custody standards are followed. CARB compliant with zero VOC’s. Earn LEED credit on your project when using our 360° core products.

Best Top Coat in the Industry – WearMax DWR is used on all of our products and is the most water repellent as well as scratch, scuff and wear resistant finish in the industry.

Service - Midwest values with an experienced team of customer service and product engineers that will design and make wood flooring that looks great and performs exceptionally.

Value Priced Products - Due to efficient raw material sourcing from North American forests and innovative manufacturing processes.

Flexible Manufacturing and Creative Product Solutions - Allows customers many product features to choose from so they can customize and offer unique solutions.

More about From The Forest

Located in Central Wisconsin, From The Forest is proud to be an innovative, American Engineered Hardwood manufacturing company that sources all its material from North America sense 2007. Overcoming much adversity, From The Forest has thrived, solidifying the company's decision to keep the business in North America. Founded by industry veteran Tryggvi Magnusson, leads his team to understand the responsibility of producing high performing, beautiful flooring products at a competitive price. With over 100 Years of combined wood flooring manufacturing experience, our customers benefit from this by knowing the products are designed for stability and long-term wear.

Care & Cleaning

The ONLY approved method for cleaning your From The Forest hardwood is to use our From The Forest Hardwood cleaner or just a damp mop and water. It is important to make sure the moisture content is a limited amount so that it will evaporate almost immediately. Standing water and hardwood floors do not mix!

If a scratch should occur, we recommend using WearMax Scratch Concealer. WearMax Scratch Concealer can be used on any flooring with a ceramic based finish, along with wood touch up markers.


Hardwood Flooring Cleaner

Sold out

Wood Repair Marker Kit

Sold out

Hardwood Scratch Conealer

Sold out

View detailed written instructions (do's & dont's) by clicking the button below

Installation


 

TONGUE AND GROOVE DO IT YOURSELF INSTALLATION

  • Installs on all grade levels (basement approved)
  • Installation Methods: glue, float, nail or staple
  • Hickory is NOT approved for installation over hydronic radiant heat

 



Installation Made Easy

  • The nail pocket allows space for a staple or nail to be used without interfering with the way each plank interlocks with each other.
  • Our innovative adhesive pockets allow more glue to be applied between the tongue and groove which creates a stronger bond to the planks and to the sub floor.
  • Do it yourself! Follow written installation instructions and contact us if you have any questions.

 

 

CLICK AND LOCK DO IT YOURSELF INSTALLATION

  • Installs on all grade levels (basement approved)
  • Installation Methods: glue, float, nail or staple
  • Hickory is NOT approved for installation over hydronic radiant heat

 

VALINGE CLICK AND LOCK PROFILE


Barrel Hickory


Natural Hickory

Get a woodsy or rustic look with high-performance standards by choosing northern hickory engineered hardwood flooring. This high-quality, sturdy engineered flooring option is suitable for almost any home environment. For those searching for flooring that suits their style to those looking for flooring to withstand an active home with children and pets, engineered hickory flooring is a perfect match. We offer numerous northern hickory engineered hardwood flooring style options. This includes your choice of tone, color, plank size, and textural preferences. Browse our selection today to find out more about our American hickory engineered flooring.

As with all our engineered flooring collections and products, we sustainably source and manufacture everything in the United States. This ensures you receive an environmentally conscious, high-quality natural hickory wood flooring you’ll admire for years to come.

MORE SPECIES TO SHOP


Hard Maple


Northern White Oak


Red Oak